# A Clear Plastic Specification Needs Haze and Transmittance

> Specify total luminous transmittance,haze and image-detail assessment for a transparent cover. Reproduce fictional flux ratios and preserve specimen thickness and measurement method.

- Canonical: https://www.aixindar.com/news/a-clear-plastic-specification-needs-haze-and-transmittance
- Markdown: https://www.aixindar.com/news/a-clear-plastic-specification-needs-haze-and-transmittance.md
- Author: Daoyu Guan — https://www.aixindar.com/experts/daoyu-guan
- Published: 2026-11-19T01:34:13.425Z
- Last updated: 2026-11-19T01:34:13.542Z
- Evidence checked: Not separately recorded in CMS
- Editorial status: Published
- Corrections: No correction record supplied by CMS.

A transparent-plastic specification should state how much light passes through the specimen and how that transmitted light is distributed. Total luminous transmittance, haze and image clarity describe different optical properties. To compare a film, sheet or finished window, retain the method, specimen thickness, surface condition, instrument geometry and relevant application arrangement with each result. A buyer selecting an inspection window or display cover also needs an evaluation of the actual viewing task. The word clear leaves these requirements open until the supplier and buyer define the quantities and acceptance conditions.

## Start with what the operator needs to see

Consider a fictional machine builder buying a transparent cover. One operator needs to see whether a warning lamp is illuminated. Another needs to read fine characters on a display behind the cover. Both describe their request as high transparency.

The tasks differ in the information that reaches the observer. Brightness, contrast and the sharpness of detail can each matter. A supplier's single percentage needs a property name before the buyer can connect it to either task.

Record the product arrangement early. Include the cover's distance from the display, viewing position, lighting and any approved surface treatment or protective layer. These fields define an application review that the material-property table can support.

A photograph can help describe the intended view when its lighting and geometry are identified. Camera exposure and processing also influence the picture. Retain the measured optical quantities beside the visual record.

## Give each optical quantity its own heading

Total luminous transmittance expresses the transmitted luminous flux relative to the incident luminous flux under the declared measurement conditions. Haze describes the wide-angle scattering component relative to transmitted light. Image clarity concerns the preservation of fine detail through the specimen.

BYK's transparency guide separates total transmission, haze and clarity. It describes the haze-related angular region as light deviating by more than 2.5 degrees and discusses narrow-angle scattering in its clarity explanation. Its instrument-specific clarity method has its own definition. Preserve the named method when using that metric. [BYK transparency measurement](https://www.byk-instruments.com/support/knowledge/white-papers/appearance/transparency-measurement)

| Property | Comparison question | Fields to retain |
| --- | --- | --- |
| Total luminous transmittance | How much luminous flux passes through? | Method, illumination and relevant spectral weighting |
| Haze | What share of transmitted light is assigned to the method's wide-angle scattering region? | Method, procedure and measurement geometry |
| Clarity or image-detail result | How is fine detail transmitted in the declared assessment? | Metric definition, apparatus and viewing arrangement |
| Specimen description | Which material and construction produced those results? | Grade, thickness, finish, layers and condition |

A percentage sign is shared by several of these quantities. Keep the property name and method in the heading every time a result moves into a quotation, catalogue or translated summary.

## Use the applicable procedure for the material

The public scope of ASTM D1003-21 concerns the light-transmitting and wide-angle-scattering properties of planar sections of essentially transparent materials. It identifies a hazemeter procedure and a spectrophotometer procedure. Its significance notes also place material-specific requirements ahead of default specimen conditions. Confirm the applicable material specification and procedure with the test provider. [ASTM D1003](https://store.astm.org/standards/d1003)

The public scope directs material with haze greater than 30 percent to Practice E2387. That is a method-selection point. A heavily diffusing cover therefore needs a review of which method describes its intended measurement.

Record the exact procedure used in an older report before comparing it with a new result. If the buyer's requirement names a particular method, an instrument's ability to display a haze percentage still needs to be connected to that method and specimen.

The technical owner should also identify where a sample can be measured appropriately. A curved lens, patterned surface or completed assembly can require a different arrangement from the planar material section described by a test's scope. Agree that arrangement before treating a catalogue row as evidence for the finished product.

## Two ratios explain the numerical difference

The following fictional arithmetic uses already corrected, consistently weighted flux quantities under one declared measurement arrangement. It illustrates the ratios after the measurement's required corrections. The numbers are invented and supply no instrument calibration or laboratory result.

Assume incident luminous flux of 1000 arbitrary units. Three imagined specimens produce the following values.

| Fictional specimen | Total transmitted flux | Wide-angle scattered transmitted flux | Total transmittance | Haze |
| --- | --- | --- | --- | --- |
| A | 900 | 9 | 90% | 1% |
| B | 900 | 45 | 90% | 5% |
| C | 700 | 7 | 70% | 1% |

The illustrative calculations are as follows.

```text
Total transmittance = transmitted flux / incident flux × 100%
Haze = wide-angle scattered transmitted flux / total transmitted flux × 100%

A transmittance = 900 / 1000 × 100% = 90%
A haze = 9 / 900 × 100% = 1%
B haze = 45 / 900 × 100% = 5%
C transmittance = 700 / 1000 × 100% = 70%
C haze = 7 / 700 × 100% = 1%
```

A and B have equal total transmittance in this exercise while their wide-angle scattering fractions differ. A and C share a haze percentage while their total transmittance differs. A procurement table can retain both axes without compressing them into one invented transparency score.

Image-detail performance would need its own defined assessment. The two ratios above leave that result unspecified. For the machine builder, add the approved viewing test that corresponds to the characters, indicator or object the operator must recognize.

## Keep thickness and surface state attached

A result on a thin film identifies that film specimen. A purchasing decision about a thicker panel needs evidence for the offered panel or a technically supported relationship between them. Record measured thickness and the actual grade instead of relying only on a shared polymer-family name.

The physical construction also matters. A coating, textured face, adhesive layer or protective film can change the optical path. Identify which layers were present for the measurement and which layers the buyer will receive or remove before use.

For a two-sided specimen, preserve the orientation required by the method or application assessment. Give each sample and face a stable identifier when repeated measurements or photographs need to be joined. The report should make it possible to establish which recorded surface condition produced a particular result.

Define the state being evaluated. An as-received cover, a cleaned cover and an exposed test specimen represent different conditions. Where a process involves cleaning or abrasion, specify the approved preparation or exposure and the subsequent measurement. A generic before-and-after label leaves the actual treatment unresolved.

## Translate the optical requirement into a review plan

1. **Describe the viewing task.** Identify what the user must recognize, along with relevant distance, lighting and viewing position.
2. **Identify the offered construction.** Record material grade, thickness, geometry, finish and layers in the supplied and intended-use states.
3. **Select the measurements.** Have the responsible technical parties agree the transmittance, scattering and image-detail properties needed for the application.
4. **Bind the method to each result.** Preserve the standard and edition, procedure, instrument configuration and specimen requirements applicable to that measurement.
5. **Agree the decision rule.** State the accepted quantities, locations or sample coverage and how results will be evaluated against the actual requirement.
6. **Retain the complete comparison.** Keep the original report, sample identities, calculations and application review beside the approved public summary.

For a content acceptance exercise, ask a second reviewer to reconstruct the two ratios in the fictional table. Then ask them which row describes the supplied thickness and whether the viewing-task result is present. This checks the usability of the explanation and record mapping.

A real specification can use different properties or sampling arrangements. The plan should follow the actual product and agreement, with named owners responsible for the technical decision.

## Write a specification row that can travel

An English product page often supplies text that distributors, buyers and AI search systems later extract. Place the property, value, method and specimen condition together. A detached statement such as optical quality 95 percent leaves its measured quantity and decision meaning unknown.

A concise fictional wording pattern is “Total luminous transmittance and haze measured on the identified 2 mm specimen under the referenced procedure.” The actual values and report reference would accompany that sentence. This is an editorial pattern awaiting real approved data.

Preserve the result's status. Catalogue typical data, a development sample and a test on a specific production lot each have a defined scope. If a material or coating changes, review the affected optical statement and the configuration supplied to existing buyers.

Xindar's manufacturing export content work can turn approved optical records into English product explanations and inquiry paths. A useful brief requires the exact property names, specimen fields and source references, with the manufacturer approving the technical interpretation and application limits. [Xindar manufacturing services](https://www.aixindar.com/industries/manufacturing/)

## Frequently asked questions

### What does 90 percent total transmittance describe?

Under the declared conditions, it describes transmitted luminous flux relative to incident luminous flux. Haze and fine-detail performance require their own identified quantities.

### Can two samples have equal transmittance and different haze?

The fictional A and B rows demonstrate that combination. Their total transmitted flux is equal while the assigned wide-angle scattered flux differs.

### Can two samples have equal haze and different transmittance?

The fictional A and C rows demonstrate that combination. Their scattered-to-transmitted ratio is equal while their total transmitted flux differs.

### What should accompany a clarity percentage?

Retain the metric definition, measurement method and apparatus. Connect it to the application viewing task through the agreed assessment.

### Which thickness belongs on the public result?

Identify the specimen thickness used for that result and its relationship to the offered construction. Obtain the relevant technical assessment for another thickness or assembly.

Sources reviewed November 15, 2026. ASTM's public scope and significance notes support the method-selection discussion. BYK's technical guide supports the optical distinctions. The flux values, sample labels and wording pattern are fictional editorial examples. Applicable test procedures and product decisions use the relevant complete technical documents.

## Editorial references

- [Editorial policy](https://www.aixindar.com/editorial-policy)
- [Research methodology](https://www.aixindar.com/research-methodology)
- [Corrections policy](https://www.aixindar.com/corrections)
